JUMP START A CAR WITH A DEAD BATTERY

 CAR BATTERY DEAD? NO PROBLEM

Chick-chick-chick-chick. It’s a sound that’s dashed hopes and shattered dreams many times before. Your car’s battery is dead, and you’re going to be late for work again. If only you knew how to jump-start your car! While playing with scary batteries and the stuff lightning is made out of may seem like a surefire way to get chicken-fried, you can do it, as long as you follow some simple steps.

Safely jump-starting your car is easy and takes only a few minutes of your time to learn and get right. It’s so easy, one could probably teach a monkey to do it. If you’d like to learn how to jump-start a car, read on and you'll be on the road, at work, and sipping your morning coffee with time to spare.

Safety

Although jump-starting your car is pretty straightforward, it’s important to remember playing with your car’s electrical system is dangerous no matter how common jump-starting is. Electricity causes shocks, of course, and batteries can emit harmful vapours. If you get it wrong and touch somewhere you shouldn’t, however, you could end up in the ER — or worse.

 

Never attempt to jump-start a damaged battery; they can explode. Taking some safety precautions will help minimize the risk. Here’s what you’ll need to ensure you stay safe.

• ·         Put on good, non-conductive mechanic gloves

• ·         Turn the ignition off and put your smart key on a shelf away from the car

• ·         Clean any oil or gasoline spills near the battery

• ·         Attach cable clamps to the battery terminals in a single motion to avoid sparks

As for the safety of your car, consult your owner’s manual before jump-starting. If you have a newer car, the risk of frying computers and complex electronics and causing costly damage is very real. Better yet, get yourself a smart jump-box that will protect your car from the power surges that can occur during jump-starting.

What You’ll Need

Here’s a list of what you need to get the job done.

Tool List

•  Set of jumper cables.

• Car with a dead battery

• Car with a live battery or a jump starter.

Here are some important suggestions for making your life easier.

• ·         Open the hood of the dead car.

• ·         If you’re using a second car, position the cars nose to nose or close enough  for the cables to reach each battery and pop the hood of the live car. Important: Make certain the cars are not touching.

• ·         If you’re using a jump-starter, place it on top of the dead car’s engine bay   so the leads can reach the battery terminals easily.

·      You’ll also need a flat surface, such as a garage floor, driveway, or street parking.

Jumping With Cables and a Second Car

• Make sure the car with the live battery is not running.

• ·         Connect the red clamp of your jumper cables to the positive terminal of the dead car’s battery. It will have a red cover or a “+” symbol on it.

• ·         Attach the opposite red clamp to the live car battery’s positive terminal.

• ·         Connect the black clamp to the negative terminal of the live car’s battery. It will have a black cover or a “-” symbol on it.

• ·         On the dead-battery car, connect the other black clamp to an unpainted, grounded-metal part or surface on the dead car, such as the vehicle’s frame.

• ·         Start the live-battery car.

• ·         Let it run for a few minutes. This will start to recharge the dead battery.

• ·         Start the dead-battery car.

• ·         If the engine doesn’t start, keep the other car running for a few more     minutes and try again.

• ·         If the engine starts, let the car run for a while before turning it off to charge the battery.

• ·         Remove the clamps in reverse order: black clamp from the grounded surface, black clamp from the good battery’s negative post, red clamp from the dead battery, red clamp from the good battery.

Jumping with a Jump-Starter

• ·         Make sure your jump-starter is plugged in or fully charged.

• ·         Most new jump-starters will come with integral cables. If not, connect the cables to the proper (positive and negative) posts on the jump starter.

• ·         Connect the red clamp to the positive post of the dead battery. It will have a “+” symbol (and possibly a red cover).

• ·         Connect the black clamp to an unpainted, grounded metal surface somewhere on the vehicle’s frame.

• ·         Once everything is connected, turn on the jump-starter.

·   After a minute or two, start the car.

• ·         If the engine doesn’t start, try again after a few more minutes of charging.

• ·         If the engine starts, turn off the jump-starter and let the car run before turning it off to charge the battery.

• ·         Remove the clamps in reverse order: black clamp from the grounded surface, red clamp from the dead battery.

It’s a good idea to recharge the jump starter in preparation for the next time you need to jump-start the battery.

Bump-Starting a Dead Car

If you have a car equipped with a manual transmission, you can bump-start the car by having a few strapping friends push you while you pop the clutch and get the car to move.

Batteries With Built-in Jump-Starters

Recently, Antigravity Batteries has begun selling car and powersport batteries with built-in jump-starters. These allow you to let the battery die and then simply press a button on the top of the battery to jump-start it. It’s handy, though they’re still pretty expensive.

Video on How to Jump-Start a Car

For all those visual learners, here’s a simple how-to video for you to wrap your head around the process of how to jump-start a car.